老廠區數位大翻新！雷射點雲精準取代過時圖紙

Old Factory Digital Upgrade! Laser Point Clouds Accurately Replace Outdated Blueprints

啟發思考｜Thought Starter

你還在用十年前的老圖紙設計工廠改造嗎？小心！那些線條可能早就跟現況「分手」了。
現在的老廠區數位化改造，不再靠翻黃的圖面，而是直接用 3D雷射掃描＋點雲技術，把現場原封不動搬到電腦裡，精準到毫米，讓設計、施工、驗收一次到位。

Still designing factory renovations with decade-old blueprints? Careful! Those lines might have already “broken up” with reality.
Today’s old factory digital upgrades no longer rely on dusty drawings. Instead, we use 3D laser scanning + point cloud technology to bring the site into the computer exactly as it is — accurate to the millimeter — so design, construction, and inspection can be done right the first time.

技術說明 | Technical Explanation

傳統工廠圖紙常有三大問題：尺寸錯誤、缺少更新、現場改造未反映。
雷射點雲技術可以在短時間內獲取全廠域的三維資料，並生成高精度模型，完全取代舊圖紙依賴，並且：

• 精度高：毫米等級，遠優於人工測量

• 範圍廣：一次捕捉整個工廠，不漏任何細節

• 更新快：現場變更可隨時重新掃描

Traditional factory drawings often suffer from three problems: incorrect dimensions, outdated information, and unrecorded modifications.
Laser point cloud technology can capture 3D data of the entire plant in a short time, generating a high-precision model that completely replaces the need for outdated blueprints:

• High Accuracy: Millimeter-level precision, far better than manual measurements

• Wide Coverage: Captures the entire factory in one go without missing details

• Quick Updates: Easily rescan after changes on-site

實務案例 | Practical Case

某石化工廠改造時，原有圖紙誤差達 15 公分，導致新設備無法安裝。
我們用 Z+F 5016 高精度雷射掃描儀全域掃描，短短兩天完成資料採集，一週內生成逆向建模，讓施工單位在數位環境中模擬安裝，完全避免了現場卡工與拆改。

English
During a petrochemical plant renovation, the original blueprints had errors of up to 15 cm, making new equipment installation impossible.
We used the Z+F 5016 high-precision laser scanner to scan the entire site, completing data capture in just two days. Within a week, we produced reverse-engineered models, enabling the construction team to simulate installations digitally, completely avoiding on-site delays and rework.

優勢整理表 | Advantage Summary Table