🏭 工廠工程3D雷射掃描＋建模讓你少跑三次現場！

3D Laser Scanning + Modeling Saves You Multiple Trips to the Job Site

📌 傳統丈量難題，總讓現場作業疲於奔命

Old-school Site Measurement Often Results in Inefficiency and Rework

在工廠改建、設備整合、機電施工等工程中，常常會遇到現場資料不足、丈量錯誤、設備干涉等問題。一次丈量不夠，回辦公室才發現缺了關鍵尺寸，還得再跑一趟現場確認。這樣的流程，不只浪費時間，也容易出錯。

In renovation or installation projects, many engineers and contractors struggle with incomplete site data or measurement mistakes. You take measurements once, then realize something’s missing, and you’re forced to return just to verify a single dimension. This inefficient back-and-forth is both time-consuming and error-prone.

✅ 一次掃描，掌握全場

Capture the Entire Site in One Scan

透過3D雷射掃描，現場環境能在數小時內完整數位化，轉換為點雲模型（Point Cloud）。這些模型能準確還原工廠現場的牆體、結構、機台、管線與其他設施。

With 3D laser scanning, a site can be digitally captured within hours. The resulting point cloud models replicate real-world structures such as walls, pipes, machines, and platforms with millimeter-level accuracy.

🔄 整合3D建模，減少來回確認

Integrated 3D Modeling Reduces the Need for Repeat Visits

將點雲轉換為可編輯的3D CAD模型（如Revit、SolidWorks等），便可在辦公室內完成設計、檢討與模擬工作。你不再需要不斷奔波確認細節，而是在模型中精準判斷尺寸與干涉，大幅提升效率。

By converting point clouds into editable CAD models (Revit, SolidWorks, etc.), design and clash checks can be done remotely—no need to revisit the site. Accurate modeling enables precision planning and decision-making.

🧩 實際應用案例

Use Case: 工廠管線整合專案

一間老舊工廠準備汰換管線系統，原始圖資缺漏嚴重，傳統丈量耗時且不安全。透過銓崴國際的3D掃描與建模服務，僅用一天掃描、三天建模，便完成精準模型供設計單位使用。結果？現場僅需實地走查一次，整個設計施工流程大幅縮短近2週。

An aging factory needed to replace its pipeline system but had no reliable blueprints. With Chuan Wei’s scanning + modeling solution, the team scanned the site in 1 day and completed a usable 3D model in just 3 days. This cut site visits from 3–5 down to just 1, saving nearly two weeks of planning and redesign time.

🧠 你該考慮使用的5個理由

Top 5 Reasons to Use 3D Scanning + Modeling in Your Project